Câu hỏi: Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42.
Early peoples had no need of engineering works to supply their water. Hunters and nomads camped near natural sources of fresh water, and populations were so sparse that pollution of the water supply was not a serious problem. After community life developed and agricultural villages became urban centres, the problem of supplying water became important for inhabitants of a city, as well as for irrigation of the farms surrounding the city. Irrigation works were known in prehistoric times, and before 2000 BC the rulers of Babylonia and Egypt constructed systems of dams and canals to impound the flood waters of the Euphrates and Nile rivers, controlling floods and providing irrigation water throughout the dry season. Such irrigation canals also supplied water for domestic purposes. The first people to consider the sanitation of their water supply were the ancient Romans, who constructed a vast system of aqueducts to bring the clean waters of the Apennine Mountains into the city and built basins and filters along these mains to ensure the clarity of the water. The construction of such extensive water-supply systems declined when the Roman Empire disintegrated, and for several centuries local springs and wells formed the main source of domestic and industrial water.
The invention of the force pump in England in the middle of the 16th century greatly extended the possibilities of development of water-supply systems. In London, the first pumping waterworks was completed in 1562; it pumped river water to a reservoir about 37m above the level of the River Thames and from the reservoir the water was distributed by gravity, through lead pipes, to buildings in the vicinity.
Increased per-capita demand has coincided with water shortages in many countries. Southeast England, for example, receives only 14 percent of Britain's rainfall, has 30 percent of its population, and has experienced declining winter rainfall since the 1980s.
In recent years a great deal of interest has been shown in the conversion of seawater to fresh water to provide drinking water for very dry areas, such as the Middle East. Several different processes, including distillation, electrodialysis, reverse osmosis, and direct-freeze evaporation, have been developed for this purpose. Some of these processes have been used in large facilities in the United States. Although these processes are successful, the cost of treating seawater is much higher than that for treating fresh water.
Which of the following is NOT mentioned as a process of conversing seawater to freshwater?
A. Steaming and cooling.
B. Water evaporation.
C. Dissolving chemicals.
D. Purification method.
Early peoples had no need of engineering works to supply their water. Hunters and nomads camped near natural sources of fresh water, and populations were so sparse that pollution of the water supply was not a serious problem. After community life developed and agricultural villages became urban centres, the problem of supplying water became important for inhabitants of a city, as well as for irrigation of the farms surrounding the city. Irrigation works were known in prehistoric times, and before 2000 BC the rulers of Babylonia and Egypt constructed systems of dams and canals to impound the flood waters of the Euphrates and Nile rivers, controlling floods and providing irrigation water throughout the dry season. Such irrigation canals also supplied water for domestic purposes. The first people to consider the sanitation of their water supply were the ancient Romans, who constructed a vast system of aqueducts to bring the clean waters of the Apennine Mountains into the city and built basins and filters along these mains to ensure the clarity of the water. The construction of such extensive water-supply systems declined when the Roman Empire disintegrated, and for several centuries local springs and wells formed the main source of domestic and industrial water.
The invention of the force pump in England in the middle of the 16th century greatly extended the possibilities of development of water-supply systems. In London, the first pumping waterworks was completed in 1562; it pumped river water to a reservoir about 37m above the level of the River Thames and from the reservoir the water was distributed by gravity, through lead pipes, to buildings in the vicinity.
Increased per-capita demand has coincided with water shortages in many countries. Southeast England, for example, receives only 14 percent of Britain's rainfall, has 30 percent of its population, and has experienced declining winter rainfall since the 1980s.
In recent years a great deal of interest has been shown in the conversion of seawater to fresh water to provide drinking water for very dry areas, such as the Middle East. Several different processes, including distillation, electrodialysis, reverse osmosis, and direct-freeze evaporation, have been developed for this purpose. Some of these processes have been used in large facilities in the United States. Although these processes are successful, the cost of treating seawater is much higher than that for treating fresh water.
Which of the following is NOT mentioned as a process of conversing seawater to freshwater?
A. Steaming and cooling.
B. Water evaporation.
C. Dissolving chemicals.
D. Purification method.
Đáp án C: Dissolving chemicals
Kỹ năng đọc hiểu: Tìm thông tin chi tiết trong bài đọc
Giải thích chi tiết:
Ý nào KHÔNG ĐƯỢC đề cập trong quá trình biến nước biển thành nước ngọt?
A. Steaming and cooling - Làm cho bốc hơi nước và làm mát.
B. Water evaporation - Bốc hơi nước
C. Dissolving chemicals - Hòa tan hóa chất
D. Purification method - Phương pháp lọc
Thông tin trong bài đọc: "Several different processes, including distillation (chưng cất), electrodialysis (điện phân), reverse osmosis (thẩm thấu ngược), and direct freeze evaporation (bốc hơi), have been developed for this purpose." – Một số quá trình khác nhau bao gồm chưng cất, điện phân, thẩm thấu ngược và bốc hơi nước đã được sử dụng cho mục đích này.
Chú ý:
• Chưng cất là quá trình làm nóng chất lỏng cho đến khi nó trở thành hơi, sau đó lại làm mát cho nó trở thành chất lỏng = tương ứng với phương án A.
• Thẩm thấu ngược là một loại lọc đặc biệt sử dụng màng mỏng bán thẩm, quá trình loại bỏ các phân tử lớn hơn như muối hòa tan (ion) và các tạp chất khác = tương ứng với phương án D.
• Phương pháp bốc hơi nước = phương án B.
Điện phân được sử dụng để vận chuyển các ion muối từ một dung dịch qua màng, trao đổi ion sang dung dịch khác dưới tác động của chênh lệch điện thế ứng dụng.
Kỹ năng đọc hiểu: Tìm thông tin chi tiết trong bài đọc
Giải thích chi tiết:
Ý nào KHÔNG ĐƯỢC đề cập trong quá trình biến nước biển thành nước ngọt?
A. Steaming and cooling - Làm cho bốc hơi nước và làm mát.
B. Water evaporation - Bốc hơi nước
C. Dissolving chemicals - Hòa tan hóa chất
D. Purification method - Phương pháp lọc
Thông tin trong bài đọc: "Several different processes, including distillation (chưng cất), electrodialysis (điện phân), reverse osmosis (thẩm thấu ngược), and direct freeze evaporation (bốc hơi), have been developed for this purpose." – Một số quá trình khác nhau bao gồm chưng cất, điện phân, thẩm thấu ngược và bốc hơi nước đã được sử dụng cho mục đích này.
Chú ý:
• Chưng cất là quá trình làm nóng chất lỏng cho đến khi nó trở thành hơi, sau đó lại làm mát cho nó trở thành chất lỏng = tương ứng với phương án A.
• Thẩm thấu ngược là một loại lọc đặc biệt sử dụng màng mỏng bán thẩm, quá trình loại bỏ các phân tử lớn hơn như muối hòa tan (ion) và các tạp chất khác = tương ứng với phương án D.
• Phương pháp bốc hơi nước = phương án B.
Điện phân được sử dụng để vận chuyển các ion muối từ một dung dịch qua màng, trao đổi ion sang dung dịch khác dưới tác động của chênh lệch điện thế ứng dụng.
Đáp án C.